SOFT PLASTICS CLEAR GLUE

A quick-drying, water-resistant, flexible plastic glue

Colours

Clear

Sizes
20ml tube

Features & benefits

Bostik Soft Plastics Clear Glue is our best flexible plastic glue, perfect for repairing soft plastics such as inflatables, tents, plastic raincoats, waders and many other PVC and vinyl items.

This vinyl glue has an ultra strong, quick drying, water resistant formula and is supplied with a PVC repair patch to make creating your water-resistant seal super easy and efficient. Plus, it dries to a crystal-clear finish so can go undetected on most items.

The plastic glue provides the perfect combination of strength and flexibility to ensure a long-lasting repair that will withstand the test of time. Say goodbye to pesky leaks or tears, your plastic repair is just a squeeze away!

Bostik Hard Plastics Clear Glue is also available for repairs to rigid plastic items.

  • A strong, clear glue for PVC and vinyl
  • Formulated to work on soft plastics - the perfect glue for inflatables, tents, raincoats, waders and more
  • Provides a flexible bond
  • Ultra strong and fast-setting
  • Water-resistant
  • Contains a PVC repair patch
  • Available in a 20ml tube

Technical information

Bostik DIY United Kingdom Repair - Soft Plastics Clear Glue Technical Data Sheet (402.94 KB)

The file is stored on an external website, please follow the link

How to use

For best results, ensure surfaces are dry, clean and free from dust and grease

  1. Lightly abrade very smooth, shiny surfaces using a fine grade sandpaper. If using this flexible plastic glue on rubber products, you should also lightly roughen the surface using fine grade sandpaper.
  2. If required, use a peice of the PVC repair patch provided and cut to size.
  3. Spread an even film of the vinyl glue onto both surfaces.
  4. Leave until almost dry (about 5 to 10 minutes) then firmly press both surfaces together until bonded.
  5. Replace cap immediately after use to prevent the adhesive from drying out and becoming unusable.
  6. Maximum bond strength is achieved after approximately 48 hours.

How to remove plastic glue

You can easily remove wet or dry Bostik Soft Plastics Clear Glue using nail polish remover or acetone. Remember to always test sensitive surfaces before applying solvent cleaners.

FAQs

How do I prepare the surfaces to be glued?

Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.

There is glue on my fingers and I can't remove it, what should I do?

Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.

What is the shelf life of the adhesive I have bought and where can I store it?

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

See all FAQs

Find new, smarter ways of doing things.

gecko.png

Find out what product you need, how to use it and where to buy it

PRODUCT FINDER